A handful of days and nights can be merely significantly better compared to others. Right now is one of those particular days. I am eventually starting a continuous publishing itinerary. Presently I identified some cool website content I want to share with you. This page about small tools was real cool. This morning was undoubtedly really going nice for me nonetheless so we hope this write-up gets to you in a good mood too.
Looking for lean/pull manufacturing solutions?
Like DorothyÂ?s ruby slippers, the answer is right at your feet.
Salem, NH (PRWEB) September 9, 2004
Like Dorothy from the Wizard of Oz, many manufacturers are searching for something they already have: Wishing to abandon the intense administration and discipline demanded by finite scheduling, they are casting about for a solution that embraces the new ideas of lean/pull manufacturing instead.
Moving beyond theory and attaining lean results is exactly what Norfield Industries in Chico, CA achieved. As a ProfitKey user for 18 years, Norfield utilized their current ERP system and implemented several lean manufacturing methods. As a result of this alliance, Norfield recognized improved efficiency and throughput, enhanced quality control and optimized overall operating results. Specifically, on time delivery to machine sales is close to 99%, on time delivery to parts went from 50% to 90%, and production increased 30% with the same resources.
Success is made up of several factors. In this case, a team with immeasurable manufacturing knowledge, a proven ERP software solution with the latest technology, and a vision to maintain a competitive advantage.
But don’t take our word for it; listen to what our customer has to say. “A good scheduling and MRP tool is necessary to manage the high volume of material and capacity requirements that we deal with. We have high part count and high velocity of work through our shop. ProfitKey’s ERP system has done an excellent job helping us manage this and has been instrumental in our success,” states Edd Burwell, Material Control Manager at Norfield.
About ProfitKey International:
ProfitKey International (http://www.profitkey.com) has been providing ERP software for discrete manufacturers for 25 years. We develop market and support manufacturing software, information and control system for make-to-order and make-to-stock manufacturers. ProfitKeyÂ?s Rapid Response Manufacturing system is a highly integrated ERP/MES family of products that emphasize finite scheduling, capacity management, cost management, real time Data Collection and eCommerce collaborative communication with suppliers/vendors.
ProfitKey International is a wholly owned subsidiary of Platinum Equity:
Platinum Equity (http://www.platinumequity.com) is a global M&A&OSM firm specialized in the merger, acquisition and operation of mission-critical services and solutions companies. Since our founding in 1995, we have completed over 40 transactions, building a portfolio of 18 market-leading companies with 32,000+ employees, more than 600,000 customer sites and revenues of $ 5.5 billion. In 2003 Platinum Equity was named the 34th largest private company by Forbes.
Norfield Industries, Chico, CA:
Norfield Industries (http://www.norfield.com) is a service company that sells machines to the pre-hung door industry.
They make everything from small tools and fixtures for the small operation door hanger all the way to fully automated CNC control pre-hung door manufacturing systems for high volume producers that supply retail outlets across the nation. They have a catalogue distribution center, and are distributors for many known brands of hand and power tools as well as all the consumables, bits, cutters, sandpaper, blades, etc. Norfield has had it’s 45th anniversary as a corporation and currently employs about 120 people.
###
©Copyright 1997-
, Vocus PRW Holdings, LLC.
Vocus, PRWeb, and Publicity Wire are trademarks or registered trademarks of Vocus, Inc. or Vocus PRW Holdings, LLC.
Date- 26th Jan 08 Article- news.nationalgeographic.com ‘New wireless machines the size of dust particles can grab and manipulate tiny objects, a breakthrough that could lead to devices that can perform surgery, a new study says. The joints of these so-called microgrippers clench when exposed to cues such as chemicals or high temperatures, allowing the devices to grasp objects. In the new research, the devices were used to pick up a bead and remove living cells at the end of a vein-like tube, similar to a biopsy in humans. In the old days, large cuts were the only ways a surgeon could access an organ. Today, doctors can sometimes operate using small incisions and tiny, tethered tools such as microgrippers. Now the “ultimate vision [is] a small machine that can be swallowed or injected that can perform the same function and reduce the invasiveness, so you don’t have to cut,” said study author David Gracias, a chemical and biomolecular engineer at Johns Hopkins University in Baltimore, Maryland. But Gracias and others caution that such medical advances are still many years down the road. Quantum Leap The microgrippers’ design—six three-jointed digits attached to a “palm”—was inspired by crabs. When exposed to certain chemicals or a temperature greater than 104 degrees Fahrenheit (40 degrees Celsius)—about the temperature of a human with a moderate-to-high fever—a polymer in the joints softens and makes the fingers spring shut. Conventional microgrippers are usually attached …
Q&A:
Question by Charlotte’s Dad: A question of priorities?
A retired corporate executive decided to take a vacation. He booked himself on a Caribbean cruise and proceeded to have the time of his life until the boat sank. He found himself on an island with no other people, no supplies, nothing, only bananas and coconuts.
After about four months, he is lying on the beach one day when the most gorgeous woman he has ever seen rows up to the shore. In disbelief, he asks her, “Where did you come from? How did you get here?”
She replies, “I rowed from the other side of the island. I landed here when my cruise ship sank.”
“Amazing,” he says. “You were really lucky to have a row boat wash up with you.”
“Oh, this?” replies the woman. “I made the boat out of raw material I found on the island. The oars were whittled from pandanus tree branches. I wove the bottom from palm branches, and the sides and stern came from a eucalyptus tree.”
“But, where did you get the tools?”
“Oh, that was no problem,” replied the woman. “On the south side of the island, a very unusual stratum of alluvial rock is exposed. I found if I fired it to a certain temperature in my kiln, it melted into forgeable, ductile iron. I used that for tools and used the tools to make the hardware.”
The guy is stunned.
“Let’s row over to my place,” she says. After a few minutes of rowing, she docks the boat at a small wharf. As the man looks to shore, he nearly falls out off the boat. Before him is a stone walk leading to an exquisite bungalow painted in blue and white. While the woman ties up the rowboat with an expertly woven hemp rope, the man can only stare ahead, dumb-struck. As they walk into the house, she says casually, “It’s not much, but I call it home. Sit down, please. Would you like a drink?”
“No. No thank you,” he says, still dazed. “I can’t take any more coconut juice.”
“It’s not coconut juice,” the woman replies. “I have a still. How about a Pina Colada?”
Trying to hide his continued amazement, the man accepts, and they sit down on her couch to talk. After they have exchanged their stories, the woman announces, “I’m going to slip into something more comfortable. Would you like to take a shower and shave? There is a razor upstairs in the bathroom cabinet.”
No longer questioning anything, the man goes into the bathroom. There, in the cabinet, is a razor made from a bone handle. Two shells honed to a hollow ground edge are fastened on to its end inside a swivel mechanism.
“This woman is amazing,” he muses. “What next?”
When he returns, she greets him wearing nothing but vines, strategically positioned, and smelling faintly of gardenias. She beckons for him to sit down next to her.
“Tell me,” she begins suggestively, slithering closer to him, “We’ve been out here for a really long time. You’ve been lonely. There’s something I’m sure you really feel like doing right now, something you’ve been longing for all these months?” She stares into his eyes.
He can’t believe what he’s hearing. “You mean……” he swallows excitedly, and tears start to form in his eyes “….. I can check my
e-mail from here?
Best answer:
Answer by steph j
LMAO!!!!! Noooooooooo! I would wanna check Y/A !!
Add your own answer in the comments!